SENGA Functional Material Additives
-
The product is coated by PTFE micro-nano particles after modification process, and has good dispersibility in PC, ABS,PC/ABS,HIPS,PBT and other polymers, which can improve the flame retardant and prevent dripping during burning. It is an environmentally friendly additive. The product will not agglomerate in plastics and has tiny influence on the transparency, it can be applied to high gloss products and has good transparency in PC material. The product can be used in combination with bromine, phosphorus nitrogen and silicon flame retardants, obvious effect with small additive amount, strong fibrosis ability and shows good liquidity and dispersibility.PTFE anti dripping agent
-
SJ-TAT is a ternary organic polycarboxylic acid, which is a water-based corrosion inhibitors and rust inhibitors. It has good rust resistance and hard water stability. It has no irritation to the skin and mucous membranes when its use concentration in the range of 0.25%-5%.Anti-rust Additive SJ -TAT
-
ASC Plus is a monobarboxylic acid, which is a kind of water-based coupling agent and anti-rust agent. It is mainly used in water-based products such as metal processing fluids, water-based quenching fluids, water-based cleaning agents, automobile antifreeze and anti-rust water. It is used as metal corrosion inhibitor additives. It has good rust resistance and hard water resistance.Anti-rust Additive ASC Plus
-
The product is a pure PTFE micropowder produced by radiation cracking technology. According to the specific situation of the base material, after adding this product, it can reduce the material friction coefficient, reduce wear and improve wear resistance. Meanwhile, it can improve the thermal stability, corrosion resistance, non-sticking and lubricity of the base material.Abrasion resistant：PTFE micropowder
-
The product is mainly used in water-based ink, coating, paint, and water-based leather varnish agent, anti-adhesion agent, fabric smoothing agent and other fields. Water-based wax additives are divided into three categories: wax dispersion, wax paste, and water-based wax powder, which could make the coating with excellent performance of scratch-resistance, improve the gloss and hydrophobic effect of the coating, and enhance hand feeling and smoothness of coating film.Water-base Wax
-
The product is a modified ultrahigh molecular weight polyethylene (UHMWPE) by special process. Improve the compatibility between ultrahigh molecular weight polyethylene and base material, it can be better dispersed in the base material when melt blending. According to the specific situation of the base material, after adding this product, it can reduce the base material friction coefficient, reduce wear and improve wear resistance. Compared with regular PTFE micropowder, this product has less influence on mechanical properties of base material, lower wear, and using environmentally friendly polyolefin material can also avoid the potential health and safety risks of fluorine-based halogen elements.Ultrahigh molecular weight polyethylene (UHMWPE)
-
The product is a cationic silicon dispersion that has been bridged and modified by a special process, and product has good compatibility and stability, which could be evenly dispersed in the system. A protective layer can be formed on coating surface after film formation, to increase the hardness and scratch resistance of the coating, and has a tiny influence on the gloss.Silica Nano-colloid
PE Micropowder Wax
PTFE Micropowder
PTFE anti dripping agent
Lubricant and Grease additives
PTFE Modified PE Micropowder Wax
PP Micropowder Wax
Anti-rust Additive SJ -TAT
Anti-rust Additive ASC Plus
Abrasion resistant：PTFE micropowder
Water-base Wax
Ultrahigh molecular weight polyethylene (UHMWPE)
Silica Nano-colloid
Online Service