Engieering Plastic
1、PTFE anti dripping agent
The product is coated by PTFE micro-nano particles after modification process, and has good dispersibility in PC, ABS,PC/ABS,HIPS,PBT and other polymers, which can improve the flame retardant and prevent dripping during burning. It is an environmentally friendly additive. The product will not agglomerate in plastics and has tiny influence on the transparency, it can be applied to high gloss products and has good transparency in PC material. The product can be used in combination with bromine, phosphorus nitrogen and silicon flame retardants, obvious effect with small additive amount, strong fibrosis ability and shows good liquidity and dispersibility.
Model No. | Description | D50 | Bulk Density | Application | Property |
SJ-D310 | 0.2-0.4mm | 0.3-0.6g/ml | PC、ABS、PC/ABS、HIPS、PBT | Cladding type, good dispersibility, used in high gloss products | |
SJ-D200 | PTFE/Styrene Acrylonitrile copolymer | 0.7-1mm | 0.6-1g/ml | PC、ABS、PC/ABS、HIPS、PBT | Cladding type, good dispersibility, used in high gloss products |
SJ-D80 | PTFE | / | 0.48-0.56g/ml | PC、ABS、PC/ABS、HIPS | Pure powder |
SJ-D90 | PTFE | / | 0.48-0.56g/ml | PC、ABS、PC/ABS、HIPS | Pure powder |
2、Abrasion resistant:PTFE micropowder
The product is a pure PTFE micropowder produced by radiation cracking technology. According to the specific situation of the base material, after adding this product, it can reduce the material friction coefficient, reduce wear and improve wear resistance. Meanwhile, it can improve the thermal stability, corrosion resistance, non-sticking and lubricity of the base material.
Model No. | Material | D50μm | Melting Point | Property |
SJ-F201 | PTFE | 7-8 | ≥320℃ | Good abrasion resistance, basically no influence on original plastic whiteness |
SJ-F203 | PTFE | 5.5-6.5 | ≥320℃ | Good dispersibility, tiny influence on the system of mechanical properties |
SJ-F101 | PTFE | 27-28 | ≥300℃ | Recycled PTFE, high cost performance |
SJ-CG323 | UHMWPE | ≥130℃ | Less influence on mechanical properties of base material, lower wear |
LATEST NEWS
- Engieering Plastic 2022-08-01 17:05:33
- Powder Coating 2022-08-01 09:02:29
- Industrial Coatings 2022-08-01 10:54:55
- Floor Coatings 2022-08-01 15:50:53
- Coil Steel Coatings 2022-07-30 13:17:57
- Non-stick Coating 2022-08-01 16:50:27
- Wood Paint Coatings 2022-08-01 16:00:29
- UV Snowflake Inks 2022-08-03 11:05:01
- Printing inks 2022-08-02 15:36:56
- Lubricant & Grease 2022-08-02 10:21:45
NEXT
Powder Coating
在线客服